DDFN7437.jpg
DDFN7279.jpg
113016.jpg
FLUX-FULL_boltless1.67a.jpg
A1132016.jpg
DDFN7415.jpg
DDFN7441.jpg
IMG_4725c.jpg
DDFN7437.jpg

FLUX


SCROLL DOWN

FLUX


The FLUX helmet system

Innovation Defined.

 

Introducing the FLUX helmet, the latest in tactical head protection. This is the tangible result of a multi-year design and development effort to create an advanced, modular helmet system. The word FLUX is an acronym for Future, Lightweight, Undercut, eXpandable and is derived from latin fluxus, meaning "flow".  Every aspect of the FLUX has a very specific and deliberate purpose while maintaining design continuity- everything "flowing" together. On the surface it may appear to be a standard helmet, however once underneath, you'll see it is like none other. 

 
FLUX Carbon-V
DDFN7279.jpg

Advanced Geometry


SCROLL DOWN

Advanced Geometry


Advanced Geometry

Follow the natural shape of your head.

The first thing you notice when putting on the FLUX is how it wraps around your head. One might argue that the outer shell geometry is one of the most significant factors in a helmet's design. That is because all other features must follow, in some form or another, this main "reference body".  The FLUX helmet is specifically designed to follow the natural shape of your head, so it results in increased comfort and stability, even when you wind up wearing it for hours on end or with multiple accessories attached. This goes a long way to actively reduce mental and physical fatigue, especially when you don't have time for either. Hundreds of variations and revisions went in to the FLUX shell design, because to make a better helmet, it all starts with a better helmet shell.

FLUX Ballistic

FLUX Profile

Edge Profile

The edge profile of the FLUX shell is designed to be fully compatible with all of your favorite communications headsets, goggles, eyewear, and respirators. The rear profile allows for proper clearance when you're wearing a ballistic vest and does not restrict movement even when lying in the prone position.

FLUX Ergonomics

Ergonomics

The FLUX shell was designed to closely follow your head and has a noticeable undercut to the outer shell. This deviates from the traditional designs that have a tendency to "flare out" at the base of the shell. While this draft is beneficial for manufacturing, it's not very consistent from a human factors standpoint.

FLUX Undercut

Undercut

The bottom of the FLUX shell extends further downwards and recurves into center. This lowers the rear mounting position of the retention system, and allows the suspension system to further cradle your head. This significantly adds to the overall stability of the helmet, especially when wearing large NOD's or other mounted accessories.

 

113016.jpg

Protection


SCROLL DOWN

Protection


Uncompromising Protection

State of the art materials and processing technology are used to manufacture each and every FLUX helmet. This is done in the pursuit of providing you the highest performing helmet system available today. For example, additional carbon fiber has been added to further increase the shell rigidity and impact performance of the FLUX Carbon. For the FLUX Ballistic, only next generation polyethylene fibers are used, which gives it unparalleled ballistic protection. All of these things cost more than the alternatives. Performance has it's price and we're unashamed. You don't settle for good enough and neither do we. The best of what's available goes into every FLUX helmet, whether it's carbon or ballistic.

FLUX Ballistic helmet side covers

One shell, multiple helmets

If you choose to expand the protective area of your FLUX helmet shell, we've got you covered. The FLUX system has multiple variations of ancillary side covers that give you several different helmet styles for the price and convenience of one. These covers attach seamlessly underneath the side rail mounts, allowing for maximum accessory space or "rail estate". The covers were designed to overlap the shell edge providing you increased protection should a fragment or slug impact anywhere along the seam. The covers, as well as the mandible and visor system, will be available after the release of the FLUX Ballistic helmet. Like the FLUX shell, all ancillary components will be offered in impact (carbon fiber) and ballistic levels of protection.

FLUX Ballistic helmet side cover overlay
FLUX Ballistic helmet mandible protection
FLUX Ballistic helmet mandible protection

FLUX-FULL_boltless1.67a.jpg

Boltless


SCROLL DOWN

Boltless


100% Boltless shell

Actually, bolt-through-less.

There are no drilled holes or inserts through the FLUX helmet to weaken the underlying ballistic material. Polymer fasteners replace all the heavy bolts, screws and other steel mounting hardware. Fastener strikes and secondary spalling are no longer an issue. Lightweight retaining structures are bonded directly to the outer shell to allow for accessory rail and shroud removal. The end result is a safer, lighter-weight helmet.

FLUX Ballistic helmet exploded view
 
FLUX Ballistic helmet structures

High-strength 

High tensile strength structural adhesive permanently bonds the polymer retaining structures to the outer shell. Maximum surface area between surfaces yield exceptional bond strength and has outstanding performance throughout a wide environmental range.

 

FLUX Ballistic helmet modular

Modular

The suspension and retention are attached to the shell independently of any exterior fasteners. If your mission requires absolute minimum weight this unique feature allows you to strip the FLUX without needing to sacrifice ballistic or impact protection.

Removable

Thermoplastic anti-rotation inserts provide you the option to remove your accessory rail if servicing or maintenance is required. Should the total applied force to the accessory rail exceed safety limits, the fasteners will fail, allowing the rail to break away from your helmet shell preventing neck or head injury.


Wilcox L4 Shroud

Precision Engineering

The L4 represents what some would consider the "gold standard" of three hole shroud design. It has a low profile, anti-snag geometry and features an anodized 6061 insert that accepts all of your optical devices and cameras. This rock solid mount is precision manufactured by Wilcox Industries at their state of the art manufacturing facility.

FLUX_FULL_EVERYTHING.114.jpg

The FLUX bolt-less configuration is maintained even with the Wilcox L4 shroud. It's connected to the front retaining structure using lightweight, anodized 6061 screws backed with nylon washers, keeping the shroud stable and under proper tension. The three t-nuts represent the highest "volumetric mass density" of any fasteners contained in the FLUX helmet (basically, they're the heaviest fastener of the helmet). Their combined weight is a little more than four US one dollar bills (4.73g).

 


A1132016.jpg

Lightweight


SCROLL DOWN

Lightweight


Lightweight

Ounces = Pounds

You take the weight of your gear very seriously as everything slowly adds up. Before you know it sacrifices are being made in the agility department. One of the design goals of the the FLUX was a weight reduction through advanced materials and innovative manufacturing technology. High performance engineering grade materials have been incorporated throughout the entire helmet and components. Many hours were spent designing components for polymers and removing all non-essential material in order to maximize weight savings.

 

Component Weight Percentages

FLUX helmet weight percentage
 

High strength polymers are used extensively throughout the FLUX- in fact 68% of the FLUX Carbon helmet, and 96% of the FLUX Ballistic consists of some type of polymer. As you can see below, the FLUX system contains a very low amount of metal. Actually, when comparing total weight, less than 2% of either helmet consists of ferrous or non-ferrous metal. This equates to substantial weight savings making it one of the strongest, lightest-weight helmets available today.

FLUX Carbon Material %

FLUX Ballistic Material %

DDFN7415.jpg

Auxillary


SCROLL DOWN

Auxillary


FLUX Accessory Rails 

Low profile helmet rails provide the FLUX helmet with an endless array of potential accessories and attachments. The rails utilize the proprietary Magpul® M-LOK slots found on your favorite black rifle. There are multiple tie-down points available when routing cables over or around the helmet. The O2 clip port is compatible with most existing center release buckles. The stable 3-point mounting system provides a rigid, adaptable platform for mounting a variety of accessories and devices.

 

FLUX helmet MLOK rail outside

Each set of rails ships with a pair of Battle Bungees. Great for additional NVG stabilization or for temporarily securing lens caps or covers for mounted devices and accessories.

The FLUX accessory rails are fully compatible with the M-LOK system. Designed by Magpul, these direct attachment slots allow you to hard mount a wide range of accessories to your helmet.

FLUX accessory rail side covers

The FLUX M-LOK accessory rail includes a lightweight spacer that you can remove to upgrade the protective area of the helmet via additional ballistic side covers.

FLUX helmet MLOK rail inside

Built Tough.

These rails, like the rest of the FLUX helmet, have been designed for maximum performance. They're molded from a semi-crystalline aromatic polyamide resin that ensures moisture and chemical resistance over a wide range of temperatures and environments. Reinforcing ribs have been applied to all major stress points to further part rigidity and decrease flex. All unnecessary material has been removed from the rails and spacer to keep weight to an absolute minimum.

DDFN7441.jpg

Comfort


SCROLL DOWN

Comfort


fluxliner_logo.jpg

Fluxliner Suspension, Cam-Lock Retention

The Fluxliner™ gives the FLUX helmet a plush, custom fit and superior stability your old helmet has been missing. It's manufactured using a proprietary rate-sensitive foam that has excellent impact performance.  In addition to the impact liner, each FLUX helmet includes two sets of multi-thickness comfort pads that allow you to manage the interior layout to get that perfect, custom fit. Cam-Lock retention with Inverseclip® make for a hassle free installation and sizing. The back retention mounting points have been lowered to the bottom extent of the shell for maximum four-point stability. This design feature allows for the elimination of the nape strap, resulting in a simplified, lightweight retention.

FLUX Helmet Fluxliner suspension and retention 

FLUX helmet impact liner

Impact Liner

Made from a proprietary rate-sensitive foam, the impact liner is designed to provide maximum impact protection while promoting airflow through both carbon and ballistic versions of the FLUX helmet.

FLUX helmet comfort pads

Comfort Pads

The comfort pads are repositionable and allows you to custom fit the Fluxliner to the exact topology of your head. Each FLUX ships standard with two sets of comfort pad sizes ensuring a precise fit.

FLUX helmet retention

Retention System

Maximum helmet stability is ensured by using a four-point retention. Cam-Lock sliders allow you to quickly adjust the tension, even while wearing the helmet. Chin cup is lined with ultrasuede for incredible comfort. 


Featuring the Inverseclip®

The Inverseclip® by HelmetComp lets you quickly and easily remove the retention system from the FLUX helmet shell. It consists of a two part design comprising of the wedge clip and the base, both manufactured from high-performance, engineering grade polymer. The retention system (webbing) is connected to the wedge clip, and the base is bonded to the interior of the helmet shell using the same high performance adhesive found in the outer shell retaining structures.

Helmetcomp inverseclip

Installation and Removal

It's easy as 1-2-3

1. Pull up on wedge clip loop slot to clear the base locking tab.
FLUX_IC.OP2.jpg
2. Slide wedge clip vertically up past the base retaining arms.
FLUX_IC.OP3.jpg
3. Continue lifting wedge clip out of base to complete removal. 

IMG_4725c.jpg

Quality


SCROLL DOWN

Quality


100% Made in the USA

Designed, Manufactured, and Assembled in the USA

 
madeintheusa.jpg

 When push comes to shove, the last thing you need to worry about is the quality of your head protection. Every FLUX helmet is built to exacting specifications and hand crafted to perfection in Martinsville, Indiana. Please feel free to contact us if you have any questions or comments.

 

The FLUX helmet wouldn't be possible without the products and innovation from these great companies:

magpul1.jpg
wilcox1.jpg